La Rete Srl manufactures certified safety and fall protection nets, compliant with the UNI EN 1263/1-2 and UNI 11808/1-2-3-4 standards, complete with certificate of conformity and annual inspection seals.

Update to Legislative Decree 81/08: Safety nets are now a regulatory priority.
The evolution of Article 115 (Title IV) is clear: safety nets and scaffolding are now explicitly identified as the cornerstones of collective protection.

These collective protection devices allow maximum freedom of movement for operators, without the use of harnesses or safety ropes.
Our nets ensure high protection standards for working at height and are supported by a wide range of fixing and anchoring systems for safe and efficient installation.

La Rete Srl manufactures certified safety and fall protection nets, compliant with the UNI EN 1263/1-2 and UNI 11808/1-2-3-4 standards, complete with certificate of conformity and annual inspection seals.

These collective protection devices allow maximum freedom of movement for operators, without the use of harnesses or safety ropes.
Our nets ensure high protection standards for working at height and are supported by a wide range of fixing and anchoring systems for safe and efficient installation.

SISTEMI DI IMPIEGO

Safety Nets for Scaffolding – Type “U”

Safety and Fall Protection Nets for Skyights – Type “S”

Safety and Fall Protection Nets for Skyights – Type “XS – YS”

“Long Life” Safety and Fall Protection Nets – Type “YS”

Regarding Type T installation systems, our company handles the production and certification of the nets; we do not supply the metal support frames (referred to as consoles) on which this type of net is installed.

SAFETY NETS FOR SCAFFOLDING – TYPE “U”

La Rete Srl produces vertical-use Type “U” safety nets, certified according to the UNI-EN 1263-1 and UNI-EN 1263-2 standards, specifically designed for protection on construction sites. Our nets, made with high-strength materials, are engineered for installation on scaffolding, roofing structures (ridges), and guardrails, providing effective protection against the fall of people and materials. Each product undergoes rigorous quality controls to ensure optimal performance in compliance with European safety standards.

The nets are supplied with an installation manual and seals for annual inspection.

ITEM RS1 CLASS A1

Use: “U-Type”
Material: H.T. Polypropylene
UV-treated
Mesh: Knotless square 60 mm
Diameter: 6 mm
Sizes: Custom
Edging: Complete with 6 mm perimeter edging
Color: White

ITEM RS4 CLASS A2

Use: “U-Type”
Material: H.T. Polypropylene
UV-treated
Mesh: Knotted square 100 mm
Diameter: 5 mm
Fixed size: 6×2 m
Edging: Complete with 6 mm perimeter edging
Color: White

ITEM RS5 CLASS A2

Use: “U-Type”
Material: H.D. Polyethylene, UV-treated
Mesh: Knotted square 100 mm
Diameter: 5 mm
Fixed sizes: 10×2 / 10.80×2 / 15×2 / 16.20×2 / 20×2 m
Edging: Complete with 6 mm perimeter edging
Color: White

ITEM RS7 CLASS A2

Use: “U-Type”
Material: H.T. Polypropylene, UV-treated
Mesh: Knotless square 100 mm
Diameter: 6 mm
Sizes: Custom
Edging: Complete with 6 mm edging
Color: White

ITEM RS7/2 CLASS A2

Use: “U-Type”
Material: H.T. Polypropylene, UV-treated
Mesh: Knotless square 100 mm
Diameter: 6 mm
Fixed sizes: 10×2 / 10.80×2 / 15×2 / 16.20×2 / 20×2 m
Edging: Complete with 6 mm edging
Color: White
00320

ITEM 00320

Use: Tensioners/Clips for fastening “U-Type” Nets
Dimensions: Length 40 cm x Height 25 mm
Composition: H.T. Polyester strap and steel buckle
Breaking load: Minimum 350 kg

Gallery

SAFETY NETS – TYPE “S”

La Rete Srl produces horizontal safety nets type “S” certified according to standards UNI EN 1263-1 and UNI EN 1263-2, ideal for protection against falls of people and objects.
They are designed for horizontal installation on scaffolding and temporary structures, ensuring high resistance and reliability.
Our type “S” nets are made with high-quality materials, supplied with a certificate of suitability and seals for annual inspection, making them the perfect choice for those seeking safe solutions compliant with European safety standards in the construction site safety sector.

art. RS3 (3)

ITEM RS3 CLASS A1

Use: “S-Type”
Material: H.T. Polypropylene, UV-treated
Mesh: Knotless square 60 mm
Diameter: 6 mm
Sizes: Custom
Edging: Complete with 6 mm edging
Perimeter rope: Complete with H.T. Polyester perimeter rope, diameter 13 mm
Color: White
art. RS8 (3)

ITEM RS8 CLASS A2

Use: “S-Type”
Material: H.T. Polypropylene, UV-treated
Mesh: Knotless square 100 mm
Diameter: 6 mm
Sizes: Custom
Edging: Complete with 6 mm edging
Perimeter rope: Complete with H.T. Polyester perimeter rope, diameter 13 mm
Color: White
RS8 CLASSE A2 + TELO ANTIPOLVERE

ITEM RS8 CLASS A2 + Antidust sheet 56C

Use: “S-Type”
Material: H.T. Polypropylene, UV-treated
Mesh: Knotless square 100 mm
Diameter: 6 mm
Sizes: Custom
Edging: Complete with 6 mm edging
Perimeter rope: Complete with H.T. Polyester perimeter rope, diameter 13 mm
Color: White
Specifications: With matching Dust Cover, item 56c
art. RS8 (3)

ITEM RS9 CLASS A2

Use: “S-Type”
Material: H.T. Polypropylene, UV-treated
Mesh: Knotless square 100 mm
Diameter: 6 mm
Fixed sizes: 5×7 / 10×5 / 15×5 / 10×10 / 20×5 / 10×6 m
Edging: Complete with 6 mm edging
Perimeter rope: Complete with H.T. Polyester perimeter rope, diameter 13 mm
Color: White

Gallery

SAFETY AND FALL-PROTECTION NETS FOR SKYLIGHTS – TYPE "XS" AND "YS"

According to the UNI EN 1263/1 standard, type “S” safety nets for horizontal use must have a minimum area of 35 square meters, and the shortest side must be no less than 5 meters. Small safety nets that do not meet these requirements are not covered by this standard and fall under national legislation.

Since there was no national regulation regarding skylight safety nets, a working group in collaboration with UNI – the Italian National Standardization Body, and INAIL developed two new standards UNI 11808/1 and UNI 11808/2, issued in March 2021, which cover all nets with a minimum side length between 2 and 5 meters.

 

ITEM RS9/2 CLASS A2

Use: “YS-Type” for skylights – According to UNI 11808/2 Standard
Specifications: Small safety net with short side from 2 m to 3 m and long side not less than 4 m
Material: H.T. Polypropylene, UV-treated
Mesh: Knotless square 100 mm
Diameter: 6 mm
Fixed sizes: 10×2 / 15×2 / 10×3 / 20×2 / 20×3 m
Edging: Complete with 6 mm edging
Perimeter rope: Complete with H.T. Polyester perimeter rope, diameter 13 mm
Color: White

ITEM RS10 CLASS A1

Use: “XS-Type” for skylights – According to UNI 11808/1 Standard
Specifications: Small safety net with short side from 3 m to 5 m
Material: H.T. Polypropylene, UV-treated
Mesh: Knotless square 60 mm
Diameter: 6 mm
Sizes: Custom
Edging: Complete with 6 mm edging
Perimeter rope: Complete with H.T. Polyester perimeter rope, diameter 13 mm
Color: White

ITEM RS11 CLASS A1

Use: “YS-Type” for skylights – According to UNI 11808/2 Standard
Specifications: Small safety net with short side from 2 m to 3 m and long side not less than 4 m
Material: H.T. Polypropylene, UV-treated
Mesh: Knotless square 60 mm
Diameter: 6 mm
Sizes: Custom
Edging: Complete with 6 mm edging
Perimeter rope: Complete with H.T. Polyester perimeter rope, diameter 13 mm
Color: White

Gallery

VISIT OUR LANDING PAGE FOR SKYLIGHT NETS

PERMANENT SAFETY AND FALL PROTECTION NETS “LONG LIFE” – TYPE “YS”

 

Retificio La Rete Srl manufactures long-lasting “Long Life” fall protection safety nets, compliant with the UNI 11808-2 standard and supplied with a certificate of conformity and user and maintenance manual.

These nets must have the shorter side between 2 and 3 meters and the longer side not less than 4 meters.
They are designed to be installed at a vertical distance from the working level to be protected not exceeding 0.50 meters.

The distinctive feature of these nets compared to other types is their durability: in fact, “Long Life” permanent safety nets are those designed for single installation at the site to be protected and remain in place until the end of their operational life.

 

"LONG LIFE" NET – TYPE "YS"

art. RS8 (3)
Use: “YS-Type” for skylights – According to UNI 11808/2 Standard
Specifications: Small safety net with short side from 2 m to 3 m and long side not less than 4 m
Material: Nylon
Mesh: Knotless square 100 mm
Diameter: 6 mm
Fixed sizes: 10×2 / 15×2 / 10×3 / 20×2 / 20×3 m
Edging: Complete with 6 mm edging
Perimeter rope: Complete with H.T. Polyester perimeter rope, diameter 13 mm
Color: White

Gallery

ANCHORAGE SAFETY NETWORKS TYPE "S", "XS" and "YS"

TN8 fune accoppiamento

ITEM TN8

Description: Joining rope in flat polyester braid
Diameter: 8 mm
Minimum breaking load: 1200 kg
Article-TN12-border-rope-in-polyester-braid-diameter-mm-12-minimum-breaking-strength-kg-3000-it-passes-through-each-mesh

ITEM TN12

Description: Edge rope in polyester braid
Diameter: 13 mm
Minimum breaking load: 3000 kg
TN14

ITEM TN14

Description: 2.50 m Polyester anchoring rope with a loop at one end
Diameter: 12 mm
Minimum
breaking load:		 300 kg

 

TN15

ITEM TN15

Description: Polyester anchoring strap
35 mm high x 100 cm long
With 15 cm loops at both ends
Minimum
breaking load:		 1800 kg

 

87MOACC

ITEM 87MOACC

Description: Oval steel carabiner
with screw-lock safety mechanism
Certificate: CE 0120 23kN EN 362:2004
00314

ITEM 00314

Description: Polyester strap with ratchet H 50
Length 0.50 m with tensioning strap 8.5 m long

 

00315

ITEM 00315

Description: Anchor with curled hook
75 mm dowel
Hole diameter 18 mm
Thread 12 mm
Use: Suitable for applications on concrete, natural stone, and solid brick.

 

00319

ITEM 00319

Description: Polyester tensioning strap
Dimensions H 35mm x L 3m.
With steel ratchet
Color: Orange

STATIC TEST

COMPANY TESTING SYSTEM
Certified by the Politecnico di Milano

DYNAMIC TEST

BACK TO CONSTRUCTION NETS

REQUEST MORE INFORMATION








    I consent to the processing of my personal data as outlined in the privacy notice available here.
    link

     

    SALES OFFICE

     

    +39 0309886336