Lifting nets offer a safe and effective solution for the handling of suspended loads using cranes, helicopters, or other lifting systems.

Made with high-strength materials and designed to ensure maximum reliability, they are ideal for transporting bulky, irregular, or hard-to-handle loads using other means.

These nets fall under the category of Lifting and Transport Accessories, in compliance with Italian Legislative Decree 17/2010, which implements the Machinery Directive 2006/42/EC.

Lifting nets offer a safe and effective solution for the handling of suspended loads using cranes, helicopters, or other lifting systems.

Made with high-strength materials and designed to ensure maximum reliability, they are ideal for transporting bulky, irregular, or hard-to-handle loads using other means.

These nets fall under the category of Lifting and Transport Accessories, in compliance with Italian Legislative Decree 17/2010, which implements the Machinery Directive 2006/42/EC.

FEATURES AND COMPONENTS

Lifting and transport nets are generally manufactured in a square shape, with variable dimensions ranging from 3 to 6 meters, and finished with a perimeter rope along the edge. The mesh size has maximum dimensions of 60x60 mm; made of high-density polyethylene or high-tenacity polypropylene, it has a minimum breaking load of 2.2 kN and is tested in accordance with the requirements set out in the UNI EN 1263-1:2015 standard. The rope along the edge passes through all the perimeter meshes of the net and is tested according to the UNI EN 1263-1:2015 standard, which requires a minimum breaking load of 30 kN.

TECHNICAL DATA

Reti-sospese-per-esterno-cod.Esterno-1

35x35 mm Mesh

Reti-sospese-per-esterno-cod.Esterno-2

50x50 mm Mesh

Reti-sospese-per-esterno-cod.Esterno-3

60x60 mm Mesh

Below is a table containing the technical data of the lifting and transport nets produced.

It is possible to produce custom versions different from the standard shown below, according to the customer’s needs and the final application.

The load capacity for this type of net is specified by the manufacturer and is expressed in kN/m². To ensure compliance with this specification, it is essential that the load is placed at the center of the net (marked in black), so that the weight is properly distributed over the entire surface.

The table below shows the correlation between the various mesh sizes available for production and their respective load capacities.

TABELLA 2

DISCOVER OUR CREATIONS

BACK TO THE TECHNICAL NETS

REQUEST MORE INFORMATION








    I consent to the processing of my personal data as outlined in the privacy notice available here.
    link

    SALES OFFICE

    +39 0309886336